T10 – P200
Model of T10 – P200 is 2-way Wide-Range speaker system which is designed to use not high power with high quality. To increase more power of this model, will be best suitable for joint work with subwoofers S12 – P600, S15 – P600.
The corps of acoustic system T10 – P200 is made of plywood 16 mm, have waterproof practical external sand texture coating. The front side is protected with solid steel grill and covered with high-quality acoustic sponge for optimal speaker protection.
At the bottom of the speaker system there is mounting top hat that gives you the ability to install your acoustic system on the speaker stand or on the wall mount in a suitable position for the desired direction of sound frequencies and musical clearance of your events!
This model is equipped with dynamic heads, with exceptionally low distortion, which reproduces linear signal in a wide dynamic range at high power.
One SpeakON connector is used in this model which is located on the rear wall of the speaker system.
In most cases this model is used for installation in such areas as: restaurants, karaoke bars, lounge cafes and churches, as well as monitors for live musicians with ability of sound reproduction of one pair up to 100 people.
|Frequency Range||50 – 20000 Hz|
|Power Handling (AEC)||200 W|
|PEAK Power||400 W|
|Sensitivity (1W/1m)||96 dB|
|Maximum SPL||119 dB|
|Nominal Impedance||8 Ohm|
|Horizontal Coverage Angle||90°|
|Vertical Coverage Angle||60°|
|LF Driver||10″ woofer / 2″ voice coil|
|HF Driver||1″ twitter / 1″ voice coil|
|Cabinet||Plywood / 16 mm|
|Coating||Black colour / Sand texture coating|
|Flying Hardware||Mounting top hat|
|Connection||SpeakON – NL4MPR|
|Size (H x W x D)||545 x 345 x 330 mm|